The OptiLogix HyperPacket OEM Voice Packetizers provide powerful features for building advanced Digital Voice Recorders. Each unit combines a compact form factor with very low power consumption resulting in unmatched reliability. Embedded DSPs for D-channel decoding, voice processing and IP packet streaming.
D-channel signalling supports Call Setup, Connect, Clear, DDI number and CLI number decoding. Supports all major ISDN variants, Q.SIG, DASS-2, DPNSS and all major PBX Digital handset D-channel protocols.
Highly secure encrypted IP streaming of the mixed upstream and downstream sides of a conversation.
Features and Benefits
- Compact aluminium box with telecoms interfaces and 10/100 Mbit/s Ethernet port
- Non intrusive and undetectable high impedance passive monitoring
- Dialled number and Caller ID signalling support
- Models for PRI-ISDN, BRI-ISDN / So bus, Digital handsets and Analog handset / trunk lines
- Digital Signal Processors for voice streaming and on-board D-channel protocol processing
- 8 channel Analog, Digital handset and So bus model
- Fractional and 30 channel PRI-ISDN / E1 models
- Analog models support DTMF, FSK Caller ID, AGC and speech detection
- Digital models support all major D-channel signalling protocols and highly accurate DigitalVox start/stop triggering for non-protocol applications
- Based on the OptiLogix V32 DSP architecture for unmatched performance and reliability
- Uses the OptiLogix generic API and driver
- Supports Win-NT, Win-2000, Win-XP, Win-2003 and Vista
- Remote TCP/IP accessibility for system configuration, FLASH memory upgrading and channel capacity license upgrading
- Fully stand-alone embedded operation
- 64kbit/s A-law and high quality compressed 36kbit/s speech encoding
- Highly secure encrypted IP streaming
- CE, FCC and RoHS compliance
Device model examples
| 8 channel Analog: | IP-HS-08 |
| 8 channel Digital / So: | IP-DX-08 |
| 30 channel PRI / E1: | IP-PRI-30 |
Technical Specifications
| Mechanical characteristics: | Compact aluminium box with external power supply adaptor |
| Operating temperature: | 0 ºC to +60 ºC |
| Humidity: | 5% to 80% non-condensing |
| Maximum power requirements: | Mains adaptor: +12Vdc (500 mA) |
| Operating systems: | Win-NT, Win-2000, Win-XP, Win-2003 and Vista |
Interface Specifications
| Primary Rate interface: | E1 (2.048Mbit/s) |
| AC impedance: | 1100 Ω |
| Maximum tap length: | 10 m (unterminated), 100 m (terminated) |
| Protocols: | All major ISDN variants, Q.SIG, DASS-2, DPNSS |
| Basic Rate interface: | 4 wire So bus |
| AC impedance: | Line Matched |
| Maximum tap length: | 500 m |
| Protocols: | Euro-ISDN |
| Digital handset interface: | 2 wire bus |
| AC impedance: | Line Matched |
| Maximum tap length: | 500 m |
| Protocols: | All major PBX D-channel signalling, DigitalVox triggering |
| Analog handset / trunk interface: | 2 wire voltage/loop start or line level audio |
| DC/AC impedance: | Infinite / 3000 Ω |
| Maximum tap length: | 5000 m |
| Signalling: | Ring detection, loop current or voltage detection, DTMF detection for dialled numbers, FSK Caller ID detection, voice activity detection |
Audio Processing
| Voice and Silence detection: | Programmable via TCP/IP |
| Upstream and downstream audio gain: | Programmable via TCP/IP |
| Frequency response: | 300-3400Hz (all compression modes) |
| Speech encoding/compression: | 64kbit/s A-law (G.711), 36kbit/s proprietary encoding |
Safety and EMI Certifications
| Safety, emissions, immunity: | EN 60950, EN 55022, EN 55024 |
| Estimated MTBF: | 600.000 hours |
| Warranty: | 3 years |
